Characterization of Ceramics

This book presents those techniques along with views on future trends in ceramics processing and advanced characterization technologies particularly appropriate to ceramics materials.

Author: Ronald E. Loehman

Publisher: Momentum Press

ISBN: 1606501941

Category: Science

Page: 295

View: 771

Ceramics are, in a general definition, materials that consist of man-made, inorganic, non-metallic solid material - either existing in a crystalline state or non-crystalline state (i.e., glasses). Materials characterization techniques are used to ensure the structural and surface integrity of ceramics for their use in a wide variety of applications, from thermal resistance to advanced electronic and optical technologies like fiber optics to structural uses. This book presents those techniques along with views on future trends in ceramics processing and advanced characterization technologies particularly appropriate to ceramics materials. Readers will find more on: Ceramic Materials preparation routes, including powder preparation by solution techniques and gas-phase techniques Formation techniques for ceramic films and coatings, thick films and bulk ceramics A review of ceramic microstructure, reactions, phase behavior, mechanical properties and electronic and magnetic ceramics

Characterization of Ceramics

This book presents those techniques along with views on future trends in ceramics processing and advanced characterization technologies particularly appropriate to ceramics materials.

Author: Ronald Loehman

Publisher: Momentum Press

ISBN: 1606501968

Category: Technology & Engineering

Page: 295

View: 560

Ceramics are, in a general definition, materials that consist of man-made, inorganic, non-metallic solid material -- either existing in a crystalline state or non-crystalline state (i.e., glasses). Materials characterization techniques are used to ensure the structural and surface integrity of ceramics for their use in a wide variety of applications, from thermal resistance to advanced electronic and optical technologies like fiber optics to structural uses. This book presents those techniques along with views on future trends in ceramics processing and advanced characterization technologies particularly appropriate to ceramics materials. Readers will find more on: -- Ceramic Materials preparation routes, including powder preparation by solution techniques and gas-phase techniques -- Formation techniques for ceramic films and coatings, thick films and bulk ceramics -- A review of ceramic microstructure, reactions, phase behavior, mechanical properties and electronic and magnetic ceramics.

Ceramic Materials

This book aims to analyze the synthesis, characterization, and applications of ceramic materials.

Author: Dolores Eliche Quesada

Publisher: BoD – Books on Demand

ISBN: 1789857732

Category: Technology & Engineering

Page: 106

View: 116

Scientific and technological development has led to the formulation of tailor-made materials, which have given rise to materials with new structural and industrial applications. This book aims to analyze the synthesis, characterization, and applications of ceramic materials. This includes an introduction to traditional and advanced ceramics, the use of traditional ceramic materials as ideal candidates for absorbing wastes, and the synthesis and characterization of advanced ceramics as nanoceramics, ytria ceramics, and electronic ceramics.

Characterization of Ceramic Materials

proceedings of the First U.S.-Japan Seminar on Basic Science of Ceramics,
Tokyo and Kyoto, Japan, February 24-March 3, 1969 National Science
Foundation (U.S.), Nihon Gakujutsu Shinkōkai Shinroku Saitō, Yoshihide Kotera,
Shigeyuki ...

Author: Shinroku Saito

Publisher:

ISBN:

Category: Ceramic materials

Page: 180

View: 593


Piezoelectric Ceramic Materials

This book reviews the state of art in polycrystalline piezoelectric ceramic materials, which covers the processing, properties, characterisation, and applications of piezoelectric ceramic materials.

Author: Xinhua Zhu

Publisher: Nova Science Pub Incorporated

ISBN: 9781616684181

Category: Technology & Engineering

Page: 63

View: 161

Piezoelectricity is the ability of certain crystalline materials to develop an electric charge proportional to a mechanical stress. Since its discovery the piezoelectricity effect has found many useful applications, such as the production and detection of sound, generation of high voltages and frequency, microbalances, and ultra fine focusing of optical assemblies. This book reviews the state of art in polycrystalline piezoelectric ceramic materials, which covers the processing, properties, characterisation, and applications of piezoelectric ceramic materials.

Advances in Dielectric Ceramic Materials

Contains 43 articles on such topics as: causes of dielectric dispersion in ferroelectric materials, microwave characterization of dielectric ceramics for wireless communications, dielectric properties of barium titanate ceramics as a ...

Author: K. M. Nair

Publisher: Amer Ceramic Society

ISBN:

Category: Technology & Engineering

Page: 481

View: 340

Contains 43 articles on such topics as: causes of dielectric dispersion in ferroelectric materials, microwave characterization of dielectric ceramics for wireless communications, dielectric properties of barium titanate ceramics as a function of grain size, single domain intrinsic properties of meso

Chemical Characterization of Ceramic Pastes in Archaeology

Rather , a ceramic paste is a complex composite of materials which should be
understood as a product of a ceramic ... The paper by Rands and Weimer on the
integrative approaches in compositional characterization of ceramics makes
many ...

Author: Hector Neff

Publisher:

ISBN:

Category: History

Page: 289

View: 271


Developments in Ceramic Materials Research

Ceramic materials display a wide range of properties which facilitate their use in many different product areas. This new book presents leading-edge research in this field from around the world.

Author: Dena Rosslere

Publisher: Nova Publishers

ISBN: 9781600217708

Category: Science

Page: 292

View: 366

Ceramics are refractory, inorganic, and non-metallic materials. They can be divided into two classes: traditional and advanced. Traditional ceramics include clay products, silicate glass and cement; while advanced ceramics consist of carbides (SiC), pure oxides (Al2O3), nitrides (Si3N4), non-silicate glasses and many others. Ceramics offer many advantages compared to other materials. They are harder and stiffer than steel; more heat and corrosion resistant than metals or polymers; less dense than most metals and their alloys; and their raw materials are both plentiful and inexpensive. Ceramic materials display a wide range of properties which facilitate their use in many different product areas. This new book presents leading-edge research in this field from around the world.

Surfaces and Interfaces of Ceramic Materials

This book contains the proceedings of the NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, held on the Oleron island, France, in September 1988.

Author: L.C. Dufour

Publisher: Springer Science & Business Media

ISBN: 9400910355

Category: Technology & Engineering

Page: 806

View: 288

This book contains the proceedings of the NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, held on the Oleron island, France, in September 1988. This Institute was organized in nine months after receiving the agreement of the NATO Scientific Affairs Division. Despite this very short time, most of the lecturers contacted have accepted our invitation to prepare a specific talk. The meeting was held at "La Vieille Perrotine" on the Oleron island. This holiday village of the French CNRS is located near the Ocean in a natural area which contributed to create a very pleasant atmosphere favourable to develop interaction between the 91 participants in this Institute. First of all, the Institute was aimed at diffusing the foremost results on the characterization of and the role played by surfaces, grain boundaries and interfaces in preparation and overall properties of ceramic materials, mainly of oxide ceramics. Through its interdisciplinary character, the Institute was also aimed at developing interaction between scientists and engineers interested in basic and practical aspects of processing and use of ceramics.

Indentation Techniques in Ceramic Materials Characterization

proceedings of the International Symposium on Indentation Techniques in
Ceramic Materials Characterization : held at the 105th Annual Meeting of the
American Ceramic Society, April 27-30, 2003, in Nashville, Tennessee Ahmad G.

Author: Ahmad G. Solomah

Publisher: Wiley-American Ceramic Society

ISBN:

Category: Science

Page: 162

View: 960

Indentation techniques have become widely used in the characterization of brittle solids due to their simplicity, cost effectiveness, rapidness, and maybe most importantly, the indenter itself can be used as a mechanical microprobe in thin films, interfaces, grain boundaries, and nanocomposites. The papers in these proceedings cover measurement techniques, reliability of, and problems associated with this testing method. Also included is the application of nano-indentation technique, as a new frontier in brittle solids characterization, e.g., thin film and nano-composite materials. Proceedings of the symposium held at the 105th Annual Meeting of The American Ceramic Society, April 27-30, in Nashville, Tennessee; Ceramic Transactions, Volume 156.

Ceramic Materials for Electronics

Author: Relva C. Buchanan

Publisher:

ISBN:

Category: Electronic ceramics

Page: 481

View: 581


Ceramic Materials for Electronics Third Edition

The Third Edition of Ceramic Materials for Electronics studies a wide range of ceramic materials, including insulators, conductors, piezoelectrics, and ferroelectrics, through detailed discussion of their properties, characterization, ...

Author: Relva C. Buchanan

Publisher: CRC Press

ISBN: 9780824740283

Category: Technology & Engineering

Page: 676

View: 350

The Third Edition of Ceramic Materials for Electronics studies a wide range of ceramic materials, including insulators, conductors, piezoelectrics, and ferroelectrics, through detailed discussion of their properties, characterization, fabrication, and applications in electronics. The author summarizes the latest trends and advancements in the field, and explores important topics such as ceramic thin film, functional device technology, and thick film technology. Edited by a leading expert on the subject, this new edition includes more than 150 pages of new information; restructured reference materials, figures, and tables; as well as additional device application-oriented segments.

Fracture Mechanics of Ceramics

These volumes, 9 and 10, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at the Japan Fine Ceramics Center, Nagoya, Japan on July 15, 16, 17, ...

Author: R.C. Bradt

Publisher: Springer Science & Business Media

ISBN: 1461533481

Category: Technology & Engineering

Page: 655

View: 968

These volumes, 9 and 10, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at the Japan Fine Ceramics Center, Nagoya, Japan on July 15, 16, 17, 1991. These proceedings constitute the fifth pair of volumes of a continuing series of conferences. Volumes 1 and 2 were from the 1973 symposium, volumes 3 and 4 from a 1977 symposium, and volumes 5 and 6 from a 1981 symposium all of which were held at The Pennsylvania State University. Volumes 7 and 8 are from the 1985 symposium which was held at the Virginia Polytechnic Institute and State University. The theme ofthis conference, as for the previous four, focused on the mechanical behavior ofceramic materials in terms of the characteristics ofcracks, particularly the roles which they assume in the fracture processes and mechanisms. The 82 contributed papers by over 150 authors and co-authors represent the current state of that field. They address many of the theoretical and practical problems ofinterest to those scientists and engineers concerned with brittle fracture.

Ceramic Materials for Energy Applications II

Readers will find plenty of charts, tables, and illustrations throughout this issue to help them better understand core concepts and applications. Moreover, all the papers are extensively referenced.

Author: Kevin M. Fox

Publisher: John Wiley & Sons

ISBN: 1118530381

Category: Technology & Engineering

Page: 194

View: 563

Dedicated to the innovative design and use of ceramic materialsfor energy applications, this issue brings readers up to date withsome of the most important research discoveries and new andemerging applications in the field. Contributions come from theproceedings of three symposia, as well as the EuropeanUnion–USA Engineering Ceramics Summit. The three symposiaare: Ceramics for Electric Energy Generation, Storage, andDistribution; Advanced Ceramics and Composites for Nuclear andFusion Applications; and Advanced Materials and Technologies forRechargeable Batteries. An abundance of charts, tables, andillustrations are included throughout.

Corrosion of Glass Ceramics and Ceramic Superconductors

A state-of-the-art treatment of glass and ceramic corrosion, this book presents fundamental chemical reactions, equations, computer codes and models, and practical examples by 33 leaders in the field.

Author: David E. Clark

Publisher: William Andrew

ISBN:

Category: Technology & Engineering

Page: 672

View: 400

A state-of-the-art treatment of glass and ceramic corrosion, this book presents fundamental chemical reactions, equations, computer codes and models, and practical examples by 33 leaders in the field.

Advanced Characterization Techniques for Ceramics

Author: Wayne S. Young

Publisher:

ISBN: 9780944904190

Category: Ceramic materials

Page: 440

View: 175


Advances in Powder and Ceramic Materials Science

This collection emphasizes the advances of powder and ceramic materials in fundamental research, technology development, and industrial applications.

Author: Bowen Li

Publisher: Springer Nature

ISBN: 3030365522

Category: Technology & Engineering

Page: 162

View: 155

This collection emphasizes the advances of powder and ceramic materials in fundamental research, technology development, and industrial applications. Ceramic materials science covers the science and technology of creating objects from inorganic, nonmetallic materials, and includes design, synthesis, and fabrication of ceramics, glasses, advanced concretes, and ceramic-metal composites.

Clays Clay Minerals and Ceramic Materials Based on Clay Minerals

This book presents the state-of-the-art results of characterization of clays, clay minerals and ceramic materials based on clay minerals.

Author: Gustavo Morari Do Nascimento

Publisher: BoD – Books on Demand

ISBN: 9535122592

Category: Science

Page: 194

View: 329

This book presents the state-of-the-art results of characterization of clays, clay minerals and ceramic materials based on clay minerals. The main goal of this work is to contribute to the rationalization of some important results obtained in the open area of clays and clay materials characterization. Moreover, this book also provides a comprehensive account on polymer and biopolymer-clay nanocomposites, use of clay as adsorption materials for industrial pollutants, ceramic materials in cultural heritage and physical-chemistry aspects of clay and clay minerals aqueous dispersions. This book will be beneficial for students, teachers and researchers of many areas who are interested to expand their knowledge about clays and its derivates in the fields of Nanotechnology, Biotechnology, Environmental Science, Industrial Remediation, Cultural Heritage, etc.

Chemical Processing of Ceramics

This work details the various chemical procedures used to characterize and synthesize ceramic materials.

Author: Burtrand Insung Lee

Publisher: CRC Press

ISBN: 9780824792442

Category: Science

Page: 572

View: 948

This work details the various chemical procedures used to characterize and synthesize ceramic materials. It presents specific examples of classes of ceramic materials fabricated by chemical processes, including thin films, membranes and superconductors. New ceramic processing technologies that can be used in ceramic membrane preparation are considered.

Ceramic Lasers

This is an invaluable guide for physicists, materials scientists and engineers working on laser ceramics.

Author: Akio Ikesue

Publisher: Cambridge University Press

ISBN: 110724417X

Category: Science

Page: 455

View: 406

Until recently, ceramic materials were considered unsuitable for optics due to the numerous scattering sources, such as grain boundaries and residual pores. However, in the 1990s the technology to generate a coherent beam from ceramic materials was developed, and a highly efficient laser oscillation was realized. In the future, the technology derived from the development of the ceramic laser could be used to develop new functional passive and active optics. Co-authored by one of the pioneers of this field, the book describes the fabrication technology and theoretical characterization of ceramic material properties. It describes novel types of solid lasers and other optics using ceramic materials to demonstrate the application of ceramic gain media in the generation of coherent beams and light amplification. This is an invaluable guide for physicists, materials scientists and engineers working on laser ceramics.